{"title":"Shop Tools","description":null,"products":[{"product_id":"abt-shop-whip-it-chain-whip","title":"Abbey Bike Tools Shop Whip-It Chain Whip","description":"\u003cp\u003eWhat good is a Shop Crombie tool without the matching whip?\u003c\/p\u003e \n\n\u003cp\u003eThere's a little more that went into the Shop Duty Whip-It than the matching Crombie. We stuck with the proven construction of a machined tang welded into a handle. We did add some length to the handle, as much as we could while still fitting inside a 700c\/29'er wheel and of course it got the matching grip. We also worked with KMC to get some more robust chain from their E bike chain. These chains have a 28% stronger pin design that helps them stay together when your wrist rolls under heavy torque. We also widened the tang everywhere the chain doesn't attached to add stiffness and give the chain more support. Then we heat treat everything to get the most out of the steel.\u003c\/p\u003e \n\n\u003cp\u003eThe other little tweak we did involves magnets. Now we don't pretend to understand how magnets work but they're kind of handy for keeping the chain wrapped around the cassette and keeping the chain chain stowed when not in use. We're also offering these as parts for the existing Whip-It.\u003c\/p\u003e \n\n\u003cp\u003eMade in Bend Oregon.\u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Default Title","offer_id":60774150799694,"sku":"CFW-Shp-ShpChnWhp","price":110.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/ABBEY90.0.jpg?v=1789158923"},{"product_id":"abt-shop-crombie","title":"Abbey Bike Tools Shop Crombie","description":"\u003cp\u003eWe've decided to take an off menu tool and offer it to the public, the Shop Crombie. Ideal for daily shop use, we've added 3\" of extra length, an ESI silicone grip and a fully heat treated tool to make working with modern bikes a little easier.\u003c\/p\u003e \n\n\u003cp\u003eMade in Bend Oregon.\u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Default Title","offer_id":60774151192910,"sku":"CFW-Shp-ShpCrmb","price":72.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/ABBEY_93.0.jpg?v=1789158924"},{"product_id":"abt-whip-it-chain-whip","title":"Abbey Bike Tools Whip It Chain Whip","description":"\u003cp\u003eA chain whip is a pretty simple tool, but the Whip-It maximizes function and simplicity. The Whip-It is made from a 12\" length of stainless steel to give you enough leverage to loosen even the most stubborn cassettes. The Whip-it's round handle provides comfort surpassing other flat bar style chain whips on the market. The icing on the cake is that Abbey's signature tool,\u003cstrong\u003e the Crombie(sold separately)stores inside the handle of the Whip-It! This means the two tools you use together, get stored together, and travel together, giving you less clutter in your tool box. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Whip-It comes in two versions, one for the 1\/2\" handle for all Crombies that Abbey makes as of January 2020, this version also works for dual sided and team issue before January 2020. There is also a version for the older 3\/8 handle single sided chain whips which were sold prior to January 2020. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOur whips use 10spd chain and are compatible from 7-13 speed cassettes from all major manufactures.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTrack Version only for 1\/8\" Chains! \u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"For Crombies","offer_id":60774238880078,"sku":"CFW-Std-ChnWhp-5","price":49.0,"currency_code":"EUR","in_stock":false},{"title":"For Track","offer_id":60774238912846,"sku":"CFW-STD-CHNWHP-Trk","price":55.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/chainwhip-std-mainimage-1024x1024.jpg?v=1789159315"},{"product_id":"abt-titanium-hanger-alignment-gauge","title":"Abbey Bike Tools Titanium Hanger Alignment Gauge","description":"\u003cp\u003eOur standard HAG has glowing reviews a mile long so what could we possible do to make it better? 6\/4 titanium. The lower half is machined from the high quality alloy the bike industry has been using for decades. Saving a significant 170 grams over our standard HAG, it's noticeably lighter and every bit as durable. \u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Default Title","offer_id":60774240354638,"sku":"Frm-Tm-Ti HAG","price":413.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/abbey610-1137a87b-b91c-499e-baf0-728231ef05a4-1024.webp?v=1789159323"},{"product_id":"abt-team-issue-titanium-hammer","title":"Abbey Bike Tools Team Issue Titanium Hammer","description":"\u003cp\u003eWhen one of my customers requested I make a titanium travel hammer I thought he was nuts, until I made it. Then I realized his genius. This is fairly specialized tool designed for the traveling mechanic and is part of our Team Issue line. However anyone who has used, currently uses, or is thinking about using a hammer in the future will appreciate this beauty.\u003c\/p\u003e\n\u003cp\u003eComing in at roughly 265 grams it's a big weight savings over more traditional hammers. The soft face is replaceable with commonly available 1\" threaded faces. At 12\" long it's compact but still long enough to remove those stubborn bearings. We finish off the Team Issue hammer with a custom silicone grip from ESI to give a bit of cushion from the all metal construction.\u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Complete Tool","offer_id":60774240944462,"sku":"Shp-Tm-Hmmr-Ti","price":234.0,"currency_code":"EUR","in_stock":false},{"title":"Part ESI Grip","offer_id":60774240977230,"sku":"Prt-HammerTi-ESI","price":10.0,"currency_code":"EUR","in_stock":false},{"title":"Part Soft Face","offer_id":60774241009998,"sku":"Prt-HammerTi-SftFc","price":10.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/main-053015-5bc17603-6d6f-4a55-a435-75f777043200-1.jpg?v=1789159325"},{"product_id":"abt-star-nut-setter","title":"Abbey Bike Tools Star Nut Setter","description":"\u003cp\u003eSometimes simple tools are the best ones to make, they aren't complicated but small tweaks to the smallest of details can stack up to big improvements in function. The Star Nut Setter is one of those tools. A simple task to install the star nut into a metal fork steer tube so you can preload your threadless headset. The outer guide slips over the steer tube and make sure that the driver stays straight while you hammer the nut into the steer. The driver has a hard stop to give you a perfect install depth as well. We took the extra clearance out of the two pieces of this tool to refine this design to something worthy of Abbey Green. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 1 and 1.125\" steel and aluminum steer tubes.\u003c\/li\u003e\n\u003cli\u003eNot for use with carbon steer tubes.\u003c\/li\u003e\n\u003cli\u003eFor use with all threadless headset brands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Bend Oregon. \u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Default Title","offer_id":60774242091342,"sku":"Frk-Std-StrNtSttr","price":74.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/abbey810-1024x1024.jpg?v=1789159331"},{"product_id":"abt-shop-hammer","title":"Abbey Bike Tools Shop Hammer","description":"\u003cp\u003e In 2018 we brought our ambassador crew out to our Bend Oregon shop to hang out for a weekend. They found this hammer sitting next to a machine and they all wanted one. After a solid year of them telling us we should make them for sale we've finally gotten around to it. \u003c\/p\u003e\n\u003cp\u003eThe Shop Hammer has a heat treated 1.5\" (38mm) stainless steel head and 12\" long handle with the same silicone grip from ESI as our Team Issue Hammer. Weighing in at a respectably stout 20oz (566g) they are sure to make short work of setting crown races and removing press fit bottom brackets. \u003c\/p\u003e\n\u003cp\u003eHammer comes standard with green soft face. Brass tips are also available. \u003c\/p\u003e\n\u003cp\u003eMade in Bend Oregon\u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Part Brass Face","offer_id":60774242582862,"sku":"Prt-HammerShp-BrssFc","price":24.0,"currency_code":"EUR","in_stock":false},{"title":"Part Plastic Soft Face","offer_id":60774242615630,"sku":"Prt-HammerShp-SftFc","price":14.0,"currency_code":"EUR","in_stock":true},{"title":"Standard","offer_id":60774242648398,"sku":"Shp-Std-Hmmr","price":132.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/hammerrubbertip-lowres-1024x1024.jpg?v=1789159333"},{"product_id":"abt-pedal-wrench","title":"Abbey Bike Tools Pedal Wrench","description":"\u003cp\u003eWith many pedal manufactures going away from 15mm wrench flats the traditional pedal wrench is becoming obsolete. To further complicate things some manufactures require both 6 and 8 mm keys within their product range. This means it's hard to know exactly what tool to grab for pedal removal or installation. Enter the Abbey Shop Pedal Wrench. With the once standard 15mm box end on one end and a custom 6 and 8 mm swivel bit on the opposite end it's the only pedal wrench you'll ever need. Perfect to keep at the fit station, on the sales floor, rental fleet counter and certainly at the tool bench. \u003c\/p\u003e\n\u003cp\u003eThe shop version of the tool gets an extra 2\" (5 cm) of leverage over the team issue for an overall length of 14.5\" Great for removing those suborn pedals. The tool receives a durable black Cerakote finish. \u003c\/p\u003e\n\u003cp\u003eMade in Bend Oregon \u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Part 6mm and 8mm Hex","offer_id":60774247694670,"sku":"Prt-PdlWrnch-Hex","price":17.0,"currency_code":"EUR","in_stock":true},{"title":"Shop","offer_id":60774247727438,"sku":"Pdl-Shp-Pdl-Wrnch-BBQv2","price":128.0,"currency_code":"EUR","in_stock":true},{"title":"Team Issue","offer_id":60774247760206,"sku":"Pdl-Tm-Pedal Wrnch-BBQ","price":140.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/pedalwrench2020lowres-1024x1024.jpg?v=1789159347"},{"product_id":"abt-harbor-dishing-gauge","title":"Abbey Bike Tools Harbor Dishing Gauge","description":"\u003cp\u003eThere's a lot of simple and cheap ways to dish wheels but where's the fun in that? Our new Harbor Gauge is simple, quick to use and offers all the modern compatibility you need. \u003c\/p\u003e\n\u003cp\u003eThe Harbor gauge, a gorgeous gem of a dishing instrument. These dishing gauges are fully machined from big billets of aluminum to a final shape and accuracy that's as nice to use as it is to look at. Compatible with wheels from 20-29 inches and all hub combinations. Stand off feet are included for checking dish with the tire in place, even the big fat ones. The gauge uses a unique spring loaded mechanism to drop the plunger. Press that little brass button on the front and the plunger will drop to the face of the hub. No archaic time sucking threaded indicators here!\u003c\/p\u003e\n\u003cp\u003ePerhaps the best thing about the Harbor Gauge is the story behind it. The tool started as a computer model like most of our tools but that's as far as it went for a couple of years, until one fateful email from the other side of the world. Tracy Rome contacted us to inquire about a surprise birthday present for her husband Dave's upcoming 30th birthday. Apparently she forgot it the year before and wanted to make the pending day something to remember. So after some secret spy photos of Dave's existing tool collection we pitched her what would become known as the Harbor Gauge. We built that first prototype and commissioned a custom walnut case for it and shipped it to Sydney where the Rome's live. It was one special morning to get a bespoke tool from your favorite bike tool company. At the time it was one of a kind and is a standout favorite in a rather extensive tool collection. Dave said the tool resembles the famed Harbor Bridge in Sydney and that's where the name comes from. \u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Default Title","offer_id":60774254149966,"sku":"Whl-Std-HrbrDGg","price":255.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/hdg.jpg?v=1789159358"},{"product_id":"abt-fit-kit","title":"Abbey Bike Tools Fit Kit","description":"\u003cp\u003eMany athletes are fortunate enough to be able to ride nearly anything. For those that are sensitive to bike fit though, replicating fit to a new bike or confirming fit after travel can be a challenge involving lots of trial and error.\u003c\/p\u003e\n\u003cp\u003eThis set of tools allows accurate and repeatable measurements for saddle height, angle and setback. The accuracy and repeatable measurements also serve as a base to make adjustments to fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe magnetic saddle height bullets (8mm and 10mm sizes) ensure you get an accurate center at the bottom bracket by locating in the crank arm fixing bolt or the crank arm preload cap of Shimano caps. This allows you to focus on the smart end of the tape measure at the saddle plate.\u003c\/li\u003e\n\u003cli\u003eTwo reference marks on the saddle plate means you can pull a measurement to the exact same spot relative to the nose of the saddle every time. This gives you accuracy down to a single millimeter, enough to satisfy the most particular or injury prone athlete.\u003c\/li\u003e\n\u003cli\u003eThe front of the saddle plate is engraved with a ruler (metric of course) to allow you to calculate saddle setback at the saddle. This allows you to drop the plumb bob off the side of the bike and clear all of the bottle cages.\u003c\/li\u003e\n\u003cli\u003eThe wide plate has ample room to mount a level, protractor or smart phone for adjusting the angle of the saddle. This is particularly helpful for non traditional saddles like SMP and Adamo. This kit is ideal for cyclists that travel and regularly have to re-assemble their bike, bike fitters and mechanics in the workshop and in the field. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The complete kit includes the saddle plate, Shimano preload crank tool, two saddle height bullets (8mm and 10mm). The Shimano preload crank tool and saddle height bullets can be purchased separately. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"\/\/www.youtube.com\/embed\/P3R_WzovkG4\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\" data-mce-fragment=\"1\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Default Title","offer_id":60774258540878,"sku":"Fit-Std-FitKit","price":180.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/fit-kit.jpg?v=1789159365"},{"product_id":"abt-decade-chain-tool","title":"Abbey Bike Tools Decade Chain Tool","description":"\u003cp\u003eAfter two years of design, testing, revisions, more testing, and more tweaking, Abbey Bike Tools Chain Tool is dialed and ready to put a wide eyed grin on your face. We broke over 10,000 chains on a single tool and pin during the development of the new tool. That's 3 chain installs a day every day for a decade, hence the name \"Decade\".\u003c\/p\u003e\n\u003cp\u003eThe threaded body and lead screw are made from cro-moly and receive a low friction powder vapor deposition (PVD) coating to give it a silky feel you've never felt in a chain tool before. The nice large handles ensure ease of use with any chain. The freely rotating pin is made from a shock rated tool steel and will likely last as long as the rest of the tool. The chain tool comes with a spare chain pin in the handle and they are cross compatible with Shimano and Campagnolo pins should you find yourself in a pinch.\u003c\/p\u003e\n\u003cp\u003eThe greatest part of the chain tool has to be the interchangeable mid plate though. The saddled part that holds the chain in position can be swapped to work with nearly anything the industry comes out with. This ensures that your investment won't become obsolete when company \"X\" comes out with an 18 speed cassette in 20 years. \u003c\/p\u003e\n\u003cp\u003eThe tool also peens Campagnolo 11 and 12 speed chains to factory specs using a backstop that threads into the backside of the tool as a stop. \u003c\/p\u003e\n\u003cp\u003eCompatible with 9-13 speed chain including the new 12 and 13 speed chains from Campagnolo and Shimano's XTR 9100. Mid Plates for 1\/8\" single speed chains and SRAM AXS group are available in the parts section.   \u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Default Title","offer_id":60774268731726,"sku":"Chn-Std-ChainTool","price":189.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/decade.jpg?v=1789159419"},{"product_id":"abt-bit-holder-only","title":"Abbey Bike Tools Bit Holder Only","description":"\u003cp\u003eOur bit holder has been quite the hit with customers so we have started offering them as a stand alone part or with a set of bits. \u003c\/p\u003e\n\u003cp\u003eThe bit holder is a machined aluminum part with a strong magnet in the base. The holder will retain the individual bits as well as affix the holder to a steel object.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHIS PRODUCT IS ONLY THE HOLDER AND DOES NOT SHIP WITH ANY BITS!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Default Title","offer_id":60774270140750,"sku":"PRT-STD-Bthldr10","price":30.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/abbeybiketoolsbitholder-f2898c5a-e553-411d-a4d9-7c.jpg?v=1789159424"},{"product_id":"abt-4-way-multi-tool-custom-bits","title":"Abbey Bike Tools 4-Way Multi-Tool Custom Bits","description":"\u003cp\u003e\u003cstrong\u003eTHIS VARIANT SHIPS WITH LOOSE BITS OF YOUR CHOICE THAT ARE HELD IN THE TOOL WITH A MAGNET AND ARE INTERCHANGEABLE!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket.\u003c\/p\u003e\n\u003cp\u003eEverybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. \u003c\/p\u003e\n\u003cp\u003eThe next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night.  \u003c\/p\u003e\n\u003cp\u003eAvailable in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed.\u003c\/p\u003e\n\u003cp\u003eThese little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Default Title","offer_id":60774271156558,"sku":"210000029167","price":57.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/abbey-bike-tools-4-way-multi-tool.jpg?v=1789159428"},{"product_id":"abt-4-way-mulit-tool","title":"Abbey Bike Tools 4-Way Mulit-Tool","description":"\u003cp\u003eThe Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket.\u003c\/p\u003e\n\u003cp\u003eEverybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. \u003c\/p\u003e\n\u003cp\u003eThe next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night.  \u003c\/p\u003e\n\u003cp\u003eAvailable in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed.\u003c\/p\u003e\n\u003cp\u003eThese little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market. \u003c\/p\u003e\n\u003cp\u003eCustom bit options available below, please leave a note in the box at checkout with which 4 you would like. \u003c\/p\u003e\n\u003cp\u003eHex Bits: 2, 2.5, 3, 4, 5, 6 \u003c\/p\u003e\n\u003cp\u003eTorx bits: 10, 15, 20, 25, 30 \u003c\/p\u003e\n\u003cp\u003e#2 jis (DIN) compatible Phillips (aka cross point)\u003c\/p\u003e\n\u003cp\u003e1.0mm slotted \u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"2.5\/4\/5\/#2JIS","offer_id":60774271418702,"sku":"MT-Std-4Way-2.5,4,5,#2jis","price":44.0,"currency_code":"EUR","in_stock":false},{"title":"2.5\/4\/5\/T25","offer_id":60774271451470,"sku":"MT-Std-4Way-2.5,4,5,T25","price":44.0,"currency_code":"EUR","in_stock":false},{"title":"3\/4\/5\/#2JIS","offer_id":60774271484238,"sku":"MT-Std-4Way-4,5,6,#2jis","price":44.0,"currency_code":"EUR","in_stock":true},{"title":"3\/4\/5\/T25","offer_id":60774271517006,"sku":"MT-Std-4Way- 3,4,5,T25","price":44.0,"currency_code":"EUR","in_stock":false},{"title":"4\/5\/6\/#2JIS","offer_id":60774271549774,"sku":"MT-Std-4Way- 4,5,6,#2jis","price":44.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/4-way-web-catalog-1024x1024.jpg?v=1789159430"},{"product_id":"abt-13mm-chamfer-less-socket","title":"Abbey Bike Tools 13mm Chamfer-Less Socket","description":"\u003cp\u003eThis is a 13mm socket made specifically for the bleeders on modern Fox forks. These bleeders are built just like a top cap, with minimal height of the hex drive. So it's a perfect application for our original chamferless sockets. Use these to install the fenders that mount behind the bleeders or when servicing your fork. Socket uses a 3\/8\" square drive\u003cbr\u003e\u003cbr\u003eCompatibility:\u003cbr\u003eFox fork models 36,38 and 40 equipped with bleeders.\u003cbr\u003e\u003cbr\u003eMade in Bend Oregon\u003c\/p\u003e","brand":"Abbey Bike Tools","offers":[{"title":"Default Title","offer_id":60774271746382,"sku":"Frk-Std-Socket-13mm","price":39.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/5765\/2046\/files\/13mm-chamferless.jpg?v=1789159431"}],"url":"https:\/\/www.bikeprovider.com\/collections\/abt-shop-tools.oembed","provider":"BikeProvider","version":"1.0","type":"link"}